This 42-meter truck-mounted concrete pump is an essential piece of equipment for any construction project that requires efficient and precise delivery of concrete. This concrete pump truck boasts exceptional performance, significantly enhancing your construction efficiency.
Main Features:
1.High configuration: Core components adopt international high-end brands, has a long-term strategic partner with Germany Rexroth, Hawe, HBC, Stiebel, Italy NEM, HBS, and American Eaton etc.
2.Stable performance and lower failure rate: Through three-dimensional modeling and finite element analysis, structure is more reasonable, whole machine performance is more stable; the failure rate has been verified through more than 20 years of market inspection;
3.High construction efficiency: configure high and low pressure automatic switching function, pumping has self-adaptive, energy-saving and efficient;
4.Strong human-computer interaction, easy operation with intelligent control, simple & clear troubleshooting.
5.The piston automatic retract technology, easy to replace and check the wear status at any time.
6.Intelligent electrical control system with energy-saving technology, easy to operate, more safe and stable.
7.Remote / Manal control method for pumping and outrigger unit
8.Flexible suspension pumping system,increases the flexible vibration damping device, extend the service life of structural & hydraulic parts.
| Model：ZYTJ42 | Technical Parameters | |||||||
|
Whole Machine
|
full length | 11640mm |
Pumping system
|
Theoretical concrete displacement | Low pressure | 140m3/h | ||
| Total height | 3900mm | high pressure | 83m3/h | |||||
| Total width | 2520mm | Distribution valve form | S | |||||
| Self weight | 32000 kg | Conveying cylinder diameter /stroke | Ø230/1600mm | |||||
| Chassis model | HOWO | Main oil pump output | 190ml/r | |||||
| Drive method | 6×4 | Hopper volume | 0.5m3 | |||||
| Engine | Weichai | Feeding height | 1450mm | |||||
| Output power | 273kw | Conveying pipe diameter | 125mm | |||||
| Emission Standards | Euro II | Max. aggregate size | 40mm | |||||
| Tire size | 11.00R20 | Concrete slump | 160-220mm | |||||
| Wheelbase | 4600+1350mm | System oil pressure | 31.5MPa | |||||
|
Boom leg parameters
|
Ma. vertical height | 41.1m | Hydraulic oil tank volume | 500L | ||||
| Max. horizontal length | 36.3m | Hydraulic circuit | Open | |||||
| Max. vertical depth | 27.4m | High and low voltage switching | Automatic switching | |||||
| Boom folding form | 5RZ | Hydraulic oil cooling | Air-cooled | |||||
| First arm
|
Length | 8850mm | Concrete pipe cleaning method | Wash | ||||
| Corner | 90o | Lubrication method | Centralized lubrication | |||||
| Second arm
|
Length | 6700mm | Accessories | |||||
| Corner | 180 o | Transfer case | Zhuzhou Gear | |||||
| Third arm
|
Length | 6500mm | Main oil pump | Rexroth/Taifeng/Push | ||||
| Corner | 180 o | Boom multi-way valve | Hawe/Norma/Kemai | |||||
| Fourth arm
|
Length | 7100mm | Solenoid | Eaton USA/
China brand |
||||
| Corner | 229o | Sheet metal | Baosteel | |||||
| Fifth arm
|
Length | 7100mm | Remote control | OHM | ||||
| Corner | 212 o | Electrical appliances | Schneider / Omron | |||||
| End conveying hose | 3m | |||||||
| Turntable rotation
angle |
±360 o | |||||||
| Front outrigger width | 6800 mm | |||||||
| Rear outrigger width | 8000 mm | |||||||
| Longitudinal span of front and rear legs | 6500mm | |||||||
| Outrigger opening method | Front leg | X type | ||||||
| Back leg | Leg swing | |||||||
